...

Frequently Asked Questions

Prolotherapy stimulates the body to repair the painful injured area(s) when the body’s natural healing process is not able to do the job on its own. Prolotherapy is an accurate injection of a non-toxic substance into the injured tissue, which causes a temporary and purposeful therapeutic inflammation. The resultant inflammation initiates a beneficial healing cascade causing an increase in blood supply, growth factors, and stem cells. This eventually produces an increase in collagen that essentially grows stronger tissues and cartilage.

The advantages of using Umbilical Cord Stem Cells, over other traditional therapies, are the astounding physiologic benefits that Stem Cells supplement to the healing cascade. When they are injected into an area that requires wound healing and growth, they are activated to proliferate and differentiate into the needed types of tissue. Stem Cells have the potential to become cartilage, tendon, ligament, bone, and muscle, as well as the ability to promote other healing factors, which are very vital to the repair. These many added benefits make Stem Cells far superior to other elementary solutions, which have traditionally been utilized for Prolotherapy.

The platelets are the specialized blood cells, which are primarily recruited in the bloodstream to heal damaged tissues. When an injury occurs, platelets are the true “front-line soldiers” that carry with them many different types of growth factors, proteins, and enzymes, which promote the healing process. They are also the cells that are most responsible for helping to stop the bleeding when tears (sprains) in ligaments and tendons occur. We are able to extract a much higher concentration of these desirable cells from your own blood and when this process is completed, we refer to this rich solution of platelets as “Platelet Rich Plasma”. Then, this “supercharged” solution can be targeted directly into the damaged area. The PRP can be injected alone or in combination with Stem Cells. Ideally, the first Prolotherapy treatment employed for the treatment of a damaged joint would include the combination of Stem Cells with PRP. Subsequent treatments may be necessary, and these follow-up Prolotherapy treatments are usually with PRP alone.

Stem Cell Therapy has minimal downtime, allowing patients to resume daily activities shortly after treatment. Generally, side effects are mild and temporary, such as soreness at the injection site.

A simple blood draw is performed from one of the veins in your arm, similar to what you have done when you have routine labs performed. This blood is then placed in a special centrifuging device that will separate the platelet-rich portion of the plasma from the platelet poor portion. This desired PRP portion is then extracted into a syringe and can be mixed with Stem Cells, which have been harvested from an umbilical cord of live healthy birth.

Bio-engineering company that harvests the cells from the Amniotic Membrane from donor Mothers, who give birth to a live healthy baby. The cells derived from the Amniotic Membrane are composed of many vital growth and healing factors. They have many of the same qualities and potency as Embryonic Stem Cells without any of the ethical dilemmas. they are highly effective, and more potent than your “Adult” cells. They also don’t carry any risks of incompatibility or rejection and undergo the very highest quality and safety screening.

Our Umbilical Cord Stem Cells are also harvested utilizing advanced tissue collection techniques to create the best minimally manipulated allograft tissue products. Our tissue donor program performs extensive background checks and testing in order to ensure the quality of the donation.

Know more

All patients with various forms of musculoskeletal disorders are prime candidates for these therapies. This includes such conditions as arthritis, tendonitis, ligamentous instability, bursitis, etc. This is a therapy that has been used by elite athletes to return to their sport more quickly and with stronger, healthier tissues. But now it is available for all people with pain and disability in their joints to gain much-improved functionality and pain relief.

 

FAQs Stem Cell Therapies Sandy, UT | Utah Stem Cells

A growing number of elite professional and amateur athletes have been making headlines recently because they have undergone successful treatments with Stem Cells and PRP Prolotherapy. NFL star quarterback Peyton Manning underwent the procedure on his neck in the off-season and had an extremely successful season with his new team, the Denver Broncos, almost winning the NFL MVP award. Star Pittsburgh Steelers wide receiver, Hines Ward, underwent PRP injections on his knee, which helped him return from an injury and secure the Super Bowl MVP. Tiger Woods had the treatment on his knee and had a successful recovery at the height of his career. Multiple professional baseball pitchers have had these treatments performed on their elbows with excellent results including L.A. Dodger’s pitcher Takashi Saito. The list of well-known sports athletes turning to these cutting-edge treatments continues to grow across many different disciplines including such notables as Kobe Bryant, Rafael Nadal, Troy Polamalu, Derrick Rose, Alex Rodriguez, and Cliff Lee.

These unsolicited celebrity endorsements have brought to light to the general public the benefits of these procedures, and now more and more people can reap the rewards of having these very same treatments performed on themselves. Utah Stem Cells is finally making these highly coveted and regarded procedures available to everyone, and not just the high profile sports elite. You don’t have to be a high-level sports professional to enjoy the greater pain relief and functionality that Stem Cell and PRP prolotherapy can provide. In many circumstances less successful and expensive treatments, such as painful surgeries with prolonged recovery periods, can be staved off or altogether avoided.

The length of time it takes to do one of the Stem Cell Prolotherapy procedures is about an hour. This will include the time it will take to examine and mark the areas to be treated, draw your blood for the PRP, mix it with the Amniotic Stem Cells, and inject your joints and problem areas.

We provide 2 levels of sedation, for maximum comfort during your procedure.

The actual injections are met with minimal discomfort, and a local anesthetic is again utilized. This portion of the procedure is typically tolerated well, and you will be able to walk out of the office without any significant pain or difficulties. Nitrous Oxide (“Laughing Gas”) which is commonly used in dentists’ offices is also available. This can dramatically reduce any pain involved with the actual procedure, as well.

Another option for patients that have anxiety over needles is Ketamine. Ketamine was introduced commercially in 1970 with the manufacturer’s description as a “rapidly acting, nonbarbiturate general anesthetic” and a suggestion that it would be useful for short procedures.

After the local anesthetic wears off a few hours later, the discomfort that will develop will be managed with prescribed pain medications. Depending on the area injected, the recovery period in which pain medications may be necessary is usually about two days. The pain will then dramatically subside over the next three to five days and you will return back to your typical baseline pain and function that you were experiencing before the procedure.

The actual injections are met with minimal discomfort, and a local anesthetic is again utilized. This portion of the procedure is typically tolerated well, and you will be able to walk out of the office without any significant pain or difficulties. Nitrous Oxide (“Laughing Gas”) which is commonly used in dentists’ offices is also available. This can dramatically reduce any pain involved with the actual procedure, as well.

Another option for patients that have anxiety over needles is Ketamine. Ketamine was introduced commercially in 1970 with the manufacturer’s description as a “rapidly acting, nonbarbiturate general anesthetic” and a suggestion that it would be useful for short procedures.

After the local anesthetic wears off a few hours later, the discomfort that will develop will be managed with prescribed pain medications. Depending on the area injected, the recovery period in which pain medications may be necessary is usually about two days. The pain will then dramatically subside over the next three to five days and you will return back to your typical baseline pain and function that you were experiencing before the procedure.

The actual injections are met with minimal discomfort, and a local anesthetic is again utilized. This portion of the procedure is typically tolerated well, and you will be able to walk out of the office without any significant pain or difficulties. Nitrous Oxide (“Laughing Gas”) which is commonly used in dentists’ offices is also available. This can dramatically reduce any pain involved with the actual procedure, as well.

Another option for patients that have anxiety over needles is Ketamine. Ketamine was introduced commercially in 1970 with the manufacturer’s description as a “rapidly acting, nonbarbiturate general anesthetic” and a suggestion that it would be useful for short procedures.

After the local anesthetic wears off a few hours later, the discomfort that will develop will be managed with prescribed pain medications. Depending on the area injected, the recovery period in which pain medications may be necessary is usually about two days. The pain will then dramatically subside over the next three to five days and you will return back to your typical baseline pain and function that you were experiencing before the procedure.

The actual injections are met with minimal discomfort, and a local anesthetic is again utilized. This portion of the procedure is typically tolerated well, and you will be able to walk out of the office without any significant pain or difficulties. Nitrous Oxide (“Laughing Gas”) which is commonly used in dentists’ offices is also available. This can dramatically reduce any pain involved with the actual procedure, as well.

Another option for patients that have anxiety over needles is Ketamine. Ketamine was introduced commercially in 1970 with the manufacturer’s description as a “rapidly acting, nonbarbiturate general anesthetic” and a suggestion that it would be useful for short procedures.

After the local anesthetic wears off a few hours later, the discomfort that will develop will be managed with prescribed pain medications. Depending on the area injected, the recovery period in which pain medications may be necessary is usually about two days. The pain will then dramatically subside over the next three to five days and you will return back to your typical baseline pain and function that you were experiencing before the procedure.

We will need to re-examine you at the 5–8-week point to see how you are responding to the procedure, and to determine the need for any further treatments. In some cases, additional treatments with PRP alone may be beneficial, but not always required. Once the maximal benefit has been achieved, you may continue to enjoy your new pain relief and functionality for several years, many years, or have complete resolution of your symptoms indefinitely. It is different for everyone depending on the degree of the injury that is being treated and individual characteristics.

Cord tissue mesenchymal stem cells have a faster doubling time than adult mesenchymal stem cells (because they are younger and contain a higher concentration of growth factors).

The fitness of adult mesenchymal stem cells declines with age. Thus Cord tissue mesenchymal stem cells will have greater fitness than adult mesenchymal stem cells (as well as a different profile of growth factors).

Our Stem Cells are processed in accordance with the standards and regulations set forth by the Food and Drug Administration (FDA) and the American Association of Tissue Banks (AATB) for allograft tissue products. Our processes have been developed to preserve the placental tissues’ natural characteristics, including the extracellular matrix, growth factors, and inherent cells, and to provide clinically efficacious products.

Our cells are derived from living, healthy donors that are pre-screened extensively during pregnancy and selected based on our stringent donor suitability criteria. In addition to reviewing prenatal test results, The Bioengineering company that works with Utah Stem Cells obtains a comprehensive medical history and behavioral risk assessment from each consenting donor prior to recovery. From aseptic processing to lot release testing of all of our tissues, we are committed to the safety and quality of our products.

An allograft is a tissue from a human donor that is transplanted from one body to another.

Clinicians have used the placental tissues for over a century as a biologic dressing in a broad range of therapeutic applications. It has been generally recognized as a versatile wound covering with published clinical results cited extensively in the literature. The placental tissues are an abundant source of collagen, as well as the other proteins, growth factors, and cells that are essential to support the body’s natural regenerative healing process. Studies have described the placental tissues as “immune privileged” because they rarely evoke an immune response in the human body. In addition, studies have shown that the placental tissues may be helpful in treating soft tissue injuries or localized areas of inflammation such as tendinitis
 
We invite you to take a look at the Bioengineering lab we have used for the past 3 years for updated information:
 
FAQs Stem Cell Therapies Sandy, UT | Utah Stem Cells

Compliance – FIOR BioscienceRegulatory and Compliance Is FIOR Bioscience right for you? FIOR Bioscience maintains a quality program designed to prevent, detect and correct deficiencies that may lead to circumstances that increase the risk of introduction, transmission, and spread of communicable diseases. The scope of the quality program applies to the products, services, and employees at FIOR Bioscience […]fiorbio.com

Mesenchymal stem cells, or MSCs, are multipotent stromal cells that can differentiate into a variety of cell types, including osteoblasts (bone cells), chondrocytes (cartilage cells), myocytes (muscle cells), and adipocytes (fat cells).

The majority of the effects of MSCs are from trophic effects (nanoparticles/microvesicles releasing their 3000 growth factors), not from engraftment.

We work closely with Care Credit and United Medical Credit. Care Credit now offers 6, 12, or 18 months with 0% Interest. Please click on the links below to apply.
Apply here for CareCredit:
CareCredit Finance

HCT/Ps are defined in 21 CFR 1271.3(d) as articles containing or consisting of human cells or tissues that are intended for implantation,transplantation, infusion, or transfer into a human recipient.

SEC. 361. [264] (a) The surgeon General, with the approval of the secretary Is authorIzed to make and entorce such regulations as in his judgment are necessary to prevent the introduction, transmission, or spread of communicable diseases from foreign countries into the States or possessions, or from one State or possession into any other State or possession. For purposes of carrying out and enforcing such regulations, the Surgeon General may provide for such inspection, fumigation, disinfection, sanitation, pest extermination, destruction of animals or articles found to be so infected or contaminated as to be sources of dangerous infection to human beings, and other measures, as in his judgment may be necessary.

SEC. 351. [262] (a) (1) No person shall introduce or deliver for introduction into interstate commerce any

biological product unless—

  1. A) a biologics license under this subsection or subsection (k) IS in eftect for the biological product; and

(B) each package of the biological product is plainly marked with-

(i) the proper name of the biological product contained in the package;

(i) the name, address, and applicable license number of the manufacturer of the biological product; and

(i) the expiration date of the biological product.

(2)A) The secretary shall establish, by regulation, requirements for the approval, suspension, and revocation of biologics licenses.

(B) PEDIATRIC STUDIES.-A person that submits an application for a license under this paragraph shall submit to the Secretary as part of the

application any assessments required under section 505B of the Federal Food, Drug, and Cosmetic Act

(C) The Secretary shall approve a biologics license application-

(i) on the basis of a demonstration that

(l) the biological product that is the subject of the application is safe, pure, and potent; and

(ll) the facility in which the biological product is manufactured, processed, packed, or held meets standards designed to assure that the biological product continues to be safe, pure, and potent; and

(i) if the applicant (or other appropriate person) consents to the inspection of the facility that is the subject of the application, in accordance with

subsection (c).

(D) POSTMARKET STUDIES AND CLINICAL TRIALS; LABELING; RISK EVALUATION AND MITIGATION STRATEGY-A person that submits an application

for a license under this paragraph is subject to sections 505(0), 505(p), and 505-1 of the Federal Food, Drug, and Cosmetic Act.

(E) The Secretary may rely upon qualified data summaries to support the approval ofa supplemental application, with respect to a qualified indication for a drug, submitted under this subsection, if such supplemental application complies with the requirements of subparagraph (B) of section 505(c)(5) of the Federal Food, Drug, and Cosmetic Act.

Section 351 of the PHS Act governs biological products that do not meet the criteria to be regulated solely under Section 361 of the PHS Act. Products regulated under Section 351 are regulated similarly to drugs or devices which must have an IND in effect or acquire pre-market approval to be commercially marketed. In contrast, Section 361 governs HCT/Ps that meet all four criteria listed in 21CFR 1271.10(a). Products that fall under section 361l do not need an IND or premarket approval to be sold because if they retain their primary functions and are used in homologous fashion, they are considered a known quantity and thus would not warrant further investigation.

(a) An HCT/P is regulated solely under section 361 of the PHS Act and the regulations in this part if it meets all of the following criteria:

(1) The HCI/P IS minimally manipulated;

(2) The HCT/P is intended for homologous use only, as reflected by the labeling, advertising, or other indications of the manufacturer’s objective intent;

(3) The manufacture of the HCT/P does not invoíve the combination of the cells or tissues with another article, except for water, crystalloids, or the sterilizing, preserving, or storage agent, provided that the addition of water, crystalloids, or the sterilizing, preserving, or storage agent does not raise new clinical safety concerns with respect to the HCT/P; and

(4) Either:

(i) The HCT/P does not have a systemic effect and is not dependent upon the metabolic activity of living cells for its primary function; or

(i) The HCT/P has a systemic effect or is dependent upon the metabolic activity of living cells for its primary function, and:

(a) Is for autologous use;

(b) Is for allogeneic use in a first-degree or second-degree blood relative; or

(c) Is tor reproductive use.

(b) ifyou are a domestic or foreign establishment that manufactures an HCT/P described in paragraph (a) of this section:

(1) You must register with FDA;

(2) You must submit to FDA a list of each HCT/P manufactured; and

(3) You must comply with the other requirements contained in this part.

[66 FR 5466, Jan. 19, 2001, as amended at 69 FR 68681, Nov. 24, 2004]

[Code of Federal Regulations]

ITitle 21, Volume 8]

[Revised as of April 1, 2020]

ICITE: 21CFR1271.10]

Because of the unique nature of HCT/Ps, FDA proposed and in 2005 implemented a tiered, risk-based approach to the regulation of HCT/Ps. Although FDA is authorized to apply the requirements in the Federal Food, Drug, and Cosmetic Act (FD&C Act) and the Public Health Service Act (PHS Act) to those products that meet the definition of drug, biologic, or device, under this tiered, risk-based approach, those HCT/Ps that meet specific criteria or fall within detailed exceptions do not require premarket review and approval.

It is not necessary to submit an RFD for every product. We recommend submitting an RFD when the classification of a product or the Agency Center to which it should be assigned is unclear or in dispute. Sponsors are encouraged to submit an RFD as soon as they have suficient information for FDA to make a decision regarding classification or assignment of a product.

The RFD should be submitted before filing any investigational or marketing application for the product. This will avoid a potential stay of the review clock if the classification or assignment of the product under review is determined to be unclear or in dispute during the review process. See 21 CFR 3.10. This will also help you avoid expending unnecessary time and resources, by ensuring that whatever of the appropriate type and to the appropriate Agency component. If you have classification or assignment questions regarding multiple related products or product families that have different configurations, ingredients, and/or proposed uses or indications, we recommend submitting a separate RFD for each product.

  1. For structural tissue, processing that does not alter the original relevant characteristics of the tissue relating to the tissue’s utility for reconstruction, repair, or replacement;
  2. For cells or nonstructural tissues, processing that does not alter the relevant biological characteristics of cells or tissues.

As defined in 21 CFR 1271.3(C), homologous use means the repair, reconstruction, replacement, or supplementation of a recipients cells or tissues with an HCT/P that performs the same basic function or functions in the recipient as in the donor. This criterion reflects the Agency’s conclusion that there would be increased safety and effectiveness concerns for HCT/Ps that are intended for a non-homologous use, because there is less basis on which to predict the product’s behavior, whereas HCT/Ps for homologous use can reasonably be expected to function appropriately (assuming all of the other criteria are also met).

  1. DO DIFFERENT REGISTERED TISSUE TYPES HAVE DIFFERENT HOMOLOGOUS APPLICATIONS?

Yes. Homologous use for any given tissue type depends on the function(s) of that tissue in the donor. Below are two FDA examples of structural tissue and a description of their original relevant characteristics. For homologous application, the end product (after processing) must maintain its original relevant characteristics in order to perform the same basic function(s) as it did in the donor.

Example 10-1: Original relevant characteristics of bone relating to its utility to support the bodyand protect internal structures include strength, and resistance to compression. Milling, grinding, and other methods for shaping and sizing bone may generally be considered minimal manipulation when they do not alter bone’s original relevant characteristics relating to its utility to support the body and protect internal structures.

Example 10-2: Original relevant characteristics of amniotic membrane relating to its utility to serve as a barrier generally include the tissue’s physical integrity, tensile strength, and elasticity.

Yes, if a product does not have objective evidence of minimal manipulation (that the tissue maintains its ability to pertorm the same basic function(s) as it did in the donor), the FDA assumes that the product does not meet this criteria.

Please note that if information does not exist to show that the processing meets the definition of minimal manipulation, FDA considers the processing of an HCT/P to be “more than minimal manipulation” that cannot qualify for regulation solely under section 361 of the PHS Act and 21 CFR Part 12718.

The FDA gives individual examples of both homologous and non-homologous use as well as minimal manipulation and more than minimal manipulation.

Homologous Use Examples

Example 19-1: Sources of hematopoietic stem/progenitor cells (HPCs) include cord blood, peripheral blood, and bone marrow.24 The basic functions of HPCs include forming and replenishing the lymphohematopoietic system.

  1. HPCS from mobilized peripheral blood are intended for transplantation into an individual with a disorder aftecting the hematopoietic system that is inherited, acquired, or the result of myeloablative treatment. This is homologous use because the peripheral blood product performs the same basic function of reconstituting the hematopoietic system in the recipient.
  2. HPCs from bone marrow are intended for infusion into an artery with a balloon catheter for the purpose of limiting ventricular remodeling following acute myocardial infarction. This is not homologous use because limiting ventricular remodeling is not a basic function of bone marrow.
  3. HPCs from cord blood are intended for intravenous infusion to treat cerebral palsy purportedly through the repair of damaged tissue in the brain through paracrine signaling or differentiation into neuronal cells. This is not homologous use because there is insufficient evidence to support that repair of neurologic tissue through paracrine signaling or diferentiation into neuronal cells is a basic function of these cells in the donor.

Example 19-2: 1he basic functions or the cornea include protecting the eye and servVing as its outermost lens. A corneal graft is transplanted to a patient with corneal blindness. This is homologous use because a corneal graft performs the same basic functions in the donor as in the recipient.

Example 19-3: The basic functions of a vein or artery include serving as a conduit for blood flow throughout the body. A cryopreserved vein or artery is used for arteriovenous access during hemodialysis. This is homologous use because the vein or artery is supplementing the vessel as a conduit for blood flow.

Example 19-4: The basic functions of amniotic membrane include serving as a selective barrier for the movement of nutrients between the external and in utero environment, protecting the fetus from the surrounding maternal environment, and serving as a covering to enclose the fetus and retain fluid in utero.

  1. Amniotic membrane is used for bone tissue replacement to support bone regeneration following surgery to repair or replace bone defects. This is not a homologous use because bone regeneration is not a basic function of amniotic membrane.
  2. An amniotic membrane product is used for wound healing and/or to reduce scarring and intlammation. This is not homologous use because wound healing and reduction of scarring and inflammation25 are not basic functions of amniotic membrane.
  3. An amniotic membrane product is applied to the surface of the eye to cover or offer protection from thee surrounding environment in ocular repair and reconstruction procedures. This is homologous use because serving as a covering and offering protection from the surrounding environment are basic functions of amniotic membrane.26

Example19-5: The basic functions of pericardium include coverings protecting against infection, fixing the heart to the mediastinum, and providing lubrication to allow normal heart movement within chest. Autologous pericardium is used to replace a dystunctional heart valve in the same patient.

This is not homologousS Use because facilitating unidirectional blood flow is not a basic function of pericardium. The use of an HCT/P from adipose tissue for the repair, reconstruction, replacement, or supplementation of adipose tissue would be considered a homologous use. In these situations, FDA would consider the HCT/P from adipose tissue to be performing the same basic function in the recipient as in the donor. In contrast, the use of an HCT/P from adipose tissue for the treatment ofa degenerative, inflammatory, or demyelinating disorder would generally be considered a non- homologous use.

Example 19-6: The basic functions of adipose tissue include providing cushioning and support tor other tissues, including the skin and internal organs, storing energy in the form of lipids, and insulating the body.

  1. Adipose tissue is used to fill voids in the face or hands (e.g, for cosmetic reasons). This is homologous use because providing Cushioning and support, is a basic function of adipose tissue.27
  2. An HCT/P from adipose tissue is used to treat musculoskeletal conditions such as arthritis or tendonitis by regenerating or promoting the regeneration of articular cartilage or tendon. This is generally not considered a homologous use because regenerating or promoting the regeneration of cartilage or tendon is not a basic function of adipose tissue.
  3. An HCT/P from adipose tissue is used to treat neurological disorders such as multiple sclerosis by limiting the autoimmune reaction and promoting remyelinization. This is generally not considered a homologous use because limiting the autoimmune reaction and promoting remyelinization are not basic functions of adipose tissue.
  4. Adipose tissue is used for transplantation into the subcutaneous areas of breast for reconstruction or augmentation procedures. This is homologous use because providing cushioning and support is a basic function of adipose tissue.

Minimal Manipulation Examples

Structural tissues may be processed by various machining and other mechanical methods to change the size or shape of the HCT/P. Such processing can be either minimal manipulation or more than minimal manipulation depending on whether the processing alters the original relevant characteristics of the structural tissue relating to its utility for reconstruction, repair, or replacement.

Example 10-1: Original relevant characteristics of bone relating to its utility to support the body and protect in ternal structures include strength, and resistance to compression. Milling, grinding, and other methods for shaping and sizing bone may generally be considered minimal manipulation when they do not alter bone’s original relevant characteristics relating to its utility to support the body and protect internal structures.

  1. A manutacturer performs threading and other mechanical machining procedures to shape bone into dowels, screws, and pins. The HCT7Ps are generally considered minimally manipulated because the processing does not alter the bone’s original relevant characteristics relating to its utility to support the body and protect internal structures.

A manufacturer grinds bone to form bone chips and particles. The HCT/Ps would generally be considered minimally manipulated because the processing does not alter the bone’s original relevant characteristics relating to its utility to support bodily structures.15

A manufacturer exposes bone to acid at elevated temperature to demineralize bone and dissolve collagen in order to forma gel. The HCT/P is generally considered more than minimally manipulated because the processing alters the bone’s original relevant characteristics relating to its utility to support the body and protect internal structures.

Example 10-2: Original relevant characteristics of amniotic membrane relating to its utiity to serve as a barriergenerally include the tissue physical integrity, tensile strength, and elasticity.

A manufacturer processes amniotic membrane to preserve it and package it in sheets. The HCT/P generally is considered minimally manipulated because the processing does not alter the original relevant characteristics of the HCT/P relating to its utility to serve as a barrier.

A manufacturer grinds and lyophilizes amniotic membrane and packages it as particles. The HCT/P generally is considered more than minimally manipulated because the processing alters the original relevant characteristics of the HCT/P relating to its utility to serve as a barrier.

Example 10-3: Original relevant characteristics of fascia lata, relating to its utility to cover muscle and aid in movement, generally include its strength, flexibility, and its fibrous, sheet-like configuration. A manufacturer grinds sheets of fascia lata into particles. The HCT/P generally is considered more than minimally manipulated because the processing alters the original relevant characteristics of the HCT/P relating to its utility to Cover muscle and aid in movement.

Example 10-4: The original relevant characteristics of skin relating to its utility to serve as aprotective covering generally include its large surtace area, keratinized, water-resistant epithelial layer (epidermis), and dense, strong, and flexible connective tissue layer (dermis).

  1. A manufacturer processes skin by mechanical meshing and cryopreservation and packages it in sheets as meshed skin. The HCT/P generally is considered minimally manipulated because the processing does not alter the original relevant characteristics of the skin relating to its utility as a protective covering.
  2. A manufacturer processes skin by removing the epidermis and then grinding the dermis into particles. The HCT/P generally is considered more than minimally manipulated because the processing alters the original relevant characteristics of skin related to its utility as a protective covering.

HCT/Ps may perform multiple functions and FDA acknowledges that structural tissues contain cells. FDA also acknowledges that some manufacturers assert that an HCT/P has both a structural and cellular/nonstructural function. However, under the regulations, HCT/Ps are considered either structural tissues or cels/nonstructural tissues. HCTYPs that physically support or serve as a barrier or conduit, or connect, cover, or cushion are generally considered structural tissues for the purpose of applying the HCT/P regulatory framework.

An HCI/P may perform the same basic Function or functions even When it is not used in the same anatomic location where it existed in the donor.28F29A transplanted HCT/P could replace missing tissue, or repair, reconstruct, or supplement tissue that is missing or damaged, either when placed in the same or different anatomic location, as long as it performs the same basic function(s) in the recipient as in the donor.

Yes! Regenative Labs Is responsible for all steps in the manufacturing process that take place after recovery, including the processing, storage labeling, packaging, and distribution of any human cell or tissue products manufactured and marketed by Regenative Labs.

Donors are thoroughly screened for risk factors and clinical evidence of relevant communicable diseases. A careful medical and soCial history IS collected in advance to ensure the donor meets all eligibility requirements. These tissues undergo extensive and comprehensive medical, social, and blood testing before processing. Only tissue cleared after this stringent screening regimen is processed and re-tested under standards established by the American Association of Tissue Banks (AATB) and FDA requirements. Every precaution is taken to eliminate the potential risk of infectious diseases through comprehensive testing following the Clinical Laboratory Improvement Amendments of 1988 (CLIA) and 42 CFR Part 493 and the FDA. Regenative Labs verifies each step of the manufacturing process to ensure the most stringent safety standards are met and maintained, from start to finish.

Yes, Regenative Labs has collaborated with Baylor University to create mass spectrometry reports detailing the structural components of Wharton’s jelly before and after processing.

No, there have not been any violations or adverse reactions reported in conjunction with Regenative Labs’ products. In fact, the last FDA inspection resulted in the rare issuance of form 482, meaning that there were no adverse observations reported.

Regenative Labs produces birth tissue products regulated under Section 361 of the PHS Act, such as amniotic membrane discs/patches (AmnioText) intended to be used in homologous fashion as a covering or barrier and Wharton’s jelly (ProText”, CryoText”, SecreText”), umbilical cord-derived tissue intended to be used in homologous fashion to provide cushioning and structural support to the site of a defect.

Regenative Labs processes wharton’s jelly to maintain its original, relevant characteristics relating to its ability to repair, replace, or supplement missing or damaged tissue. Our Wharton’s jelly products are cut and reduced to a size that sufficiently maintains its basic structural function(s) and that can flow through a syringe. We work with a number of universities to study the structural properties of Wharton’s jelly in the donor and verifythat those same properties are present in the end product produced by Regenative Labs.

**Ask for our objective scientific prooffrom Baylor College of Medicine

Prorext” is our coded (and payable) Wharton’s jelly product that is intended to be used in a homologous fashion to repair, replace, or supplement missing or damaged tissue by providing cushioning and structural support directly to the site of a defect. This product has seen Medicaid/Medicare coverage in ten of the thirteen MAC regions. Regenative Labs’ Wharton’s jelly products can be applied straight to the site of the defect in soft tissue or cartilage using a syringe. See Q4246 on pg. 63 of CMS decision.

Wharton’s jelly has a shelf life of 5 years when the product is appropriately stored between -40 and -80 degrees Celsius. Regenative Labs’ facility houses multiple SO-LOW ultra-low freezers for product storage, including an entire freezer where each new batch is quarantined until sterility results are received and the product is cleared for distribution. For physicians wishing to purchase and store products locally, we offer cryogenic-tanks that can store nearly 150 vials.

Regenative Labs houses more than a dozen certified tissue bank auditors and analyzes relevant regulatory information with great diligence. Our specialized industry knowledge is put to good use in our physician teachable training, which provides answers directly from 21CFR 1271 and a comprehensive quiz to test your knowledge. This training is totally free to Physician Partners of Regenative Labs.

Disassociated amniotic membrane products that have been processed into a flowable product do not fall under Section 361 of the PHS act because they are more than minimally manipulated. The FDA describes the basic function for amniotic membrane to be acting as a barrier, so when it is produced in a liquid (or flowable) form, it clearly does not maintain its utility to serve as a barrier and thus the processing is considered more than minimal manipulation.

This may cause one to question how Regenative Labs’ wharton’s jelly products, which are processed in a similar fashion, meet the minimal manipulation criteria while amniotic flowables do not. The FDA does not list the primary functions of Wharton’s jelly, but they are well-documented in clinical literature as providing cushioning and support, protecting the umbilical vein and arteries from mechanical stress. Unlike Amniotic membrane, Wharton’s jelly can retain its ability to perform its primary function when processed into a flowable product.

While some structural tissues may undergo processing that alters the cellular or extracellular matrix Components without altering the original relevant characteristics of the tissue, the same processing may alter the original relevant characteristics of a different structural tissue. Therefore, to assess whether a processing step alters the original relevant characteristics of a structural tissue relating to its utility for reconstruction, repair, or replacement, you should consider the effects of the processing on the properties that contribute to the specific tissue’s function in the donor, for each type of tissue you manufacture.

Generally, products used in an IND cannot be sold commercially because there is not sufficient evidence of its satety and efficacy to treat or cure a specific disease or condition. When a study collects enough data to establish statistical significance for safety and efficacy, an approved new drug is established by the FDA and the product can begin commercial sale.

The FDA keeps a comprehensive database of all registered tissue establishments and products in Human Cell and Tissue Establishment Registration (HCTERS). This online database allows you to search for FDA registration by product name and by company name.

The recommended number of sessions for ketamine treatment varies based on individual needs and responses. Typically, an initial course consists of 6 sessions over a span of 2 to 3 weeks. Sessions are often scheduled 2 to 3 times per week to achieve optimal results.

After the initial phase, some patients may benefit from maintenance treatments every few weeks or months to sustain their progress. Our team at The Re Clinic will work closely with you to develop a personalized treatment plan that best addresses your mental health needs.

If you have any further questions or would like to discuss your specific situation, feel free to reach out to us!

This treatment is eligible for Health Savings Account and Flex Savings Account. Ketamine is not covered by insurance. 

The Re Clinic

BOOK AN APPOINTMENT

Get In Touch With Us!

Call Now Button